Bistable selfholding solenoid GCH-25.06

Selfholding solenoids
Dimensions: 25 x 25 x 30.2

Reversing solenoid in open design for high demands, with two de-energized end positions.

Specifications

Nominal voltage
24VDC
Permanent holding force (currentless)
≥25N
Operating mode
Coils individually controlled
Standard mode
Electrical power
72W
Duty cycle ED%
(cycle time 30s)
5%
Pulling force
6N
Suction time
50ms
pushing
+   red
-   blue
pulling
+   red
-   blue
Operating mode
Coils individually controlled
Power mode
Electrical power
144W
Duty cycle ED%
(cycle time 30s)
3%
Pulling force
12N
Suction time
45ms
pushing
+   red
-   blue
pulling
+   red
-   blue
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
IP20 (IEC 60529)
El. connection type
Stranded wire (300mm), AWG24
Surface treatment
Housing zinc plated & blue passivated
Moving mass
0.009 kg
Total magnet weight
0.082 kg
GCH

Comments

  1. Magnets manufactured and tested according to DIN VDE 0580
  2. Magnetic force measured at operating temperature at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The force values are only valid as reference values and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "Technical Explanations" provide information on the use of holding magnets as well as to general assembly and safety instructions

Technical drawings

 

 

Specifications

Function

pulling / pushing

Preferred nominal voltage

24VDC (max. 230VAC)

Insulation class

B (130°C) DIN VDE 0580

Prüfspannung
Overvoltage category

EN 60664-1 III

Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)

El. connection type

Stranded wires (300mm), AWG20 plug connection DIN-175301-803

Surface treatment

black lacquered

Moving mass

0.060kg

Total magnet weight

0.430kg

Technical drawings

 

 

GCH

Comments

  1. Magnets manufactured and tested according to DIN VDE 0580
  2. Magnetic force measured at operating temperature at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The force values are only valid as reference values and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "Technical Explanations" provide information on the use of holding magnets as well as to general assembly and safety instructions

Do you have any questions?

Leave us your question, we will answer it as soon as possible.

Mehr Zeit für Ferien gefällig?