Economy solenoid GE-45.10

Solenoid
Abmasse: 44.7 x 44.7 x 65

Solenoid with closed housing for high demands on mechanical life. Available in pull or push type and with return spring on request. Special designs are available.

Specifications

Function
pulling / pushing
Preferred nominal voltage
Universal termination U
Plug-in connection S
Terminal box K

24VDC (max. 50VDC)
24VDC (max. 250VAC)
24VDC (max. 250VAC)
Insulation class
F (155°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
Universal termination U
Plug-in connection S
Terminal box K

IP00 (IEC 60529)
IP20 (IEC 60529)
IP20 (IEC 60529)
El. connection type
Universal termination U
Plug-in connection S
Terminal box K

Plug-in connector DIN 175301-803
Plug-in connector DIN 175301-803
Terminal box
Surface treatment
Housing zinc plated & black painted, armature electroless nickel plated
Moving mass
0.150 kg
Total magnet weight
0.670 kg
GE

Comments

  1. Magnets manufactured and tested according to DIN VDE 058
  2. Magnetic force at operating temperature measured at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The magnetic holding force values are only reference values and may deviate by ±10% due to tolerances.
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "technical explanations" provide information on the use of magnets as well as on general installation and safety instructions.

Technical drawings

 

Specifications

Function

pulling / pushing

Preferred nominal voltage

24VDC (max. 230VAC)

Insulation class

B (130°C) DIN VDE 0580

Prüfspannung
Overvoltage category

EN 60664-1 III

Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)

El. connection type

Stranded wires (300mm), AWG20 plug connection DIN-175301-803

Surface treatment

black lacquered

Moving mass

0.060kg

Total magnet weight

0.430kg

Technical drawings

 

GE

Comments

  1. Magnets manufactured and tested according to DIN VDE 058
  2. Magnetic force at operating temperature measured at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The magnetic holding force values are only reference values and may deviate by ±10% due to tolerances.
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "technical explanations" provide information on the use of magnets as well as on general installation and safety instructions.

Do you have any questions?

Leave us your question, we will answer it as soon as possible.

Mehr Zeit für Ferien gefällig?