Menü

Electro magnet GT-50

Electro magnet

Electro magnet with a holding force, maintained by continuous application of current.

Contents

Back to all holding solenoids
7_04_1_GT-50-1

Specifications

Electrical power
6.8W
Distance Z
Magnet - counter plate [mm]
0  |  0.1  |  0.5  |  1  |  2  |  3  |  4  |  5
Holding force [N]
750  |  440  |  55  |  17  |  6  |  -  |  -  |  -
Residual holding force (de-energized) [N]
~75  |  0
Preferred nominal voltage
24 VDC (max. 230 VAC)
Duty cycle ED%
100%
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40 (IEC 60529)
El. connection type
Lead wire W
Plug-in connection S

Stranded wire (300mm), AWG20
Plug-in connector DIN 175301-803
Rectifier
Lead wire W
Plug-in connection S
max. current 1.5A
not available
available
Surface treatment
Housing nitrocarburized
Total magnet weight
0.320 kg

Technische Daten

Download data sheet
3D-Modelle

Notes

  1. Holding magnets manufactured and tested according to DIN VDE 0580
  2. Holding force measured at operating temperature at 20°C Ambient temperature with 90% nominal voltage
  3. The holding force values are only valid as reference values and may deviate by ±10% due to tolerances
  4. The holding force is valid with the ground surface in contact Counter plate made of steel S235 (EN 10025)
  5. Special versions are available
  6. Subject to change without notice - Illustrations non-binding
  7. RoHS compliant, free of halogens (PVC)
  8. Our "Technical Explanations" provide information on about the use of holding magnets as well as to general assembly and safety instructions

Got questions?

Leave us your question, we will answer it as soon as possible.

Facebook Instagram Linkedin