Industrial solenoid (return operation) Glu-70.20

Solenoid
Dimensions: ?70 x 137

The return operation industrial solenoid is equipped with two coils. Its armature can take two different positions. Depending on the coil that is switched on, the armature moves to one or the other end position. Special versions are available.

Specifications

Function
Return operation
Preferred nominal voltage
24 VDC (max. 230 VAC)
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
Lead wire W
Plug-in connection S
Terminal box K

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)
IP40; max. IP65 (IEC 60529)
El. connection type
Stranded wires (300 mm), AWG20 Plug-in connection DIN-175301-803 Terminal housing
Surface treatment
black lacquered
Moving mass
0.477 kg
Total magnet weight
3.085 kg
GIu

Notes

  1. Magnets manufactured and tested according to DIN VDE 058
  2. Magnetic force at operating temperature measured at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The magnetic holding force values are only reference values and may deviate by ±10% due to tolerances.
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "technical explanations" provide information on the use of magnets as well as on general installation and safety instructions.

Technical drawings

 

Specifications

Function

pulling / pushing

Preferred nominal voltage

24VDC (max. 230VAC)

Insulation class

B (130°C) DIN VDE 0580

Prüfspannung
Overvoltage category

EN 60664-1 III

Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)

El. connection type

Stranded wires (300mm), AWG20 plug connection DIN-175301-803

Surface treatment

black lacquered

Moving mass

0.060kg

Total magnet weight

0.430kg

Technical drawings

 

GIu

Notes

  1. Magnets manufactured and tested according to DIN VDE 058
  2. Magnetic force at operating temperature measured at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The magnetic holding force values are only reference values and may deviate by ±10% due to tolerances.
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "technical explanations" provide information on the use of magnets as well as on general installation and safety instructions.

Got questions?

Leave us your question, we will answer it as soon as possible.