Menü

Miniature solenoid GM-35.10

Solenoid
Dimensions: 40 x 35 x 60

Single stroke solenoid with open frame as an efficient solution for applications with low forces and low demands on mechanical life. With return spring on request. Special designs are available.

Contents

Back to all linear solenoids
1_03_1_GM-35-1

Specifications

Function
pulling / pushing
Preferred nominal voltage
24 VDC (max. 50 VDC)
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
IP00 (IEC 60529)
El. connection type
Socket tongues 2.8 x 0.8 DIN 46342-1
Stranded wire (300mm), AWG22
Surface treatment
Housing zinc plated & blue passivated, armature hard chrome plated
Moving mass
0.058 kg
Total magnet weight
0.420 kg

Technische Daten

Download data sheet
3D-Modelle

Notes

  1. Magnets manufactured and tested according to DIN VDE 058
  2. Magnetic force at operating temperature measured at 20°C ambient temperature, horizontal direction of movement with 90% nominal voltage
  3. The magnetic holding force values are only reference values and may deviate by ±10% due to tolerances.
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "technical explanations" provide information on the use of magnets as well as on general installation and safety instructions.

Got questions?

Leave us your question, we will answer it as soon as possible.

Facebook Instagram Linkedin