Rotary solenoid DGV-50.95

Rotary solenoids
Dimensions: 50 x 50 x 35

Compact rotary solenoid without axial movement of the shaft. Can be fitted with adjustable return spring if required.

Specifications

Function
rotating
Preferred nominal voltage
24VDC (max. 230VAC)
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40 (IEC 60529)
El. connection type
Lead wire W
Plug-in connection S

Stranded wire (300mm), AWG20
Plug-in connector DIN 175301-803
Rectifier
Lead wire W
Plug-in connection S
max. current 1.5A
not available
available
Surface treatment
Housing nitrocarburized
Moving mass
0.065 kg
Total magnet weight
0.538 kg
DGV

Notes

  1. Magnets manufactured and tested according to DIN VDE 0580
  2. Torques measured at operating temperature at 20°C Ambient temperature with 90% nominal voltage
  3. The torques are only valid as reference values and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "Technical Explanations" provide information on the use of holding magnets as well as to general assembly and safety instructions

Technical drawings

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

 

Specifications

Function

pulling / pushing

Preferred nominal voltage

24VDC (max. 230VAC)

Insulation class

B (130°C) DIN VDE 0580

Prüfspannung
Overvoltage category

EN 60664-1 III

Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)

El. connection type

Stranded wires (300mm), AWG20 plug connection DIN-175301-803

Surface treatment

black lacquered

Moving mass

0.060kg

Total magnet weight

0.430kg

Technical drawings

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

Magnet bestromt gezeichnet
Solenoid illustrated in energised position

 

DGV

Notes

  1. Magnets manufactured and tested according to DIN VDE 0580
  2. Torques measured at operating temperature at 20°C Ambient temperature with 90% nominal voltage
  3. The torques are only valid as reference values and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free of halogens (PVC)
  7. Our "Technical Explanations" provide information on the use of holding magnets as well as to general assembly and safety instructions

Got questions?

Leave us your question, we will answer it as soon as possible.

Mechaniker/in Versuchswerkstatt

Mechaniker/in Versuchswerkstatt