Menü
Search
Close this search box.

DYNAMAG DYM-050

dynamic linear solenoid
Dimensions: ø50 x 103

The DYNAMAG is a dynamic linear solenoid for short-stroke electrical
applications in mechanical engineering.

  • Electric short-stroke movements straight forward: High forces with minimal energy consumption, without overheating.
  • Fast processes made easy: High number of cycles through electomagnetic drive concept.
  • Effortless integration: Single cable for power supply, control signals and end position sensors.

Contents

Zurück zu den Hubmagneten
DYM-50_25_20N_3000px
DYM-50_25_20N_3000px

Contents

Zurück zu allen Dynamischer Linearmagneten
DYM-50_25_20N_3000px
DYM-50_25_20N_3000px

Specifications

Function
Return operation
Nominal voltage
24 VDC
Voltage range
20.4 ... 27.6 (24 ± 15%) VDC
Stroke
25 / 20 / 15 / 10 mm
Nominal Force
22 N (Pin 8 = 0) / 11 N (Pin 8 = 1) // 35 N (Pin 8 = 0) / 17.5 N (Pin 8 = 1)
Holding force [N] (selectable)
35 N (Pin 8 = 0) / 17.5 N (Pin 8 = 1)
Max. Power
75 W (Pin 8 = 0) / 24 W (Pin 8 = 1)
Max. Current consumption (short-term)
3.125 A (Pin 8 = 0) / 1.0 A (Pin 8 = 1)
Holding power
6.2 W (Pin 8 = 0) / 3.0 W (Pin 8 = 1)
Holding current
0.270 A (Pin 8 = 0) / 0.125 A (Pin 8 = 1)
Min. stroke time (without load)
40 / 35 / 30 / 25 ms
Maximum work cycles
250 / 300 1/min
Working cycles continuous operation
50 (Pin 8 = 0) / 250 (Pin 8 = 1) // 60 (Pin 8 = 0) / 300 (Pin 8 = 1)
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
IP65 (IEC 60529)
El. connection type
M12 round plug A-coded, 8-pin, plug
Surface treatment
black lacquered
Moving mass
0.145 / 0.155 / 0.145 / 0.155 kg
Total magnet weight
1.150 / 1.160 / 1.150 / 1.160 kg
Storage temperature
-20 ... + 60 °C
Ambient temperature
0 ... + 40 °C
Relative air humidity
0 … 90 %
Anti-twist device
No external torque permitted
Maintenance
maintenance-free
CE labelling
DIN VDE 0580 / IEC61000-6 (EMV) / 2011/65/EU (RoHS II + III)
DYM-50_25_20N_3000px

Notes

  1. Alle DYNAMAG sind hergestellt und geprüft nach DIN VDE 0580
  2. The forces are measured at operating temperature at 20°C ambient temperature, horizontal direction of movement with 90% rated voltage
  3. Force specifications are for reference only and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free from halogens and silicone
  7. Die Betriebsanleitung gibt Auskunft über den Einsatz des DYNAMAG sowie zu allgemeinen Montage- und Sicherheitshinweisen
  8. The documents required in accordance with the Machinery Directive 2006/42/EC and all environmental declarations are available on request
  9. Made in Switzerland
Download PDF with details

Technical drawings

Please note
The following configurations are available:
Stroke 25 & 20mm with nominal force 22N
Stroke 15 & 10mm with nominal force 35N
Accessories can be ordered separately
(for details see data sheet accessories)

 

Accessories Overview
10_01_2_DYM-50_Opt_Flansch_Flange
10_01_2_DYM-50_Opt_Gabelkopf_Clevis
10_01_2_DYM-50_Opt_Schwenklager_Swivel-Bearing
Product downloads
DYM-050 Datenblatt
DYM-050 Accessories
DYM-050 EU Declaration of incorporation

Download CAD data

3D model DYNAMAG 25 Stroke
3D model DYNAMAG 20 Stroke
3D model DYNAMAG 15 Stroke
3D model DYNAMAG 10 Stroke
3D model DYNAMAG flange accessories
3D model DYNAMAG swivel bearing accessories
3D model DYNAMAG clevis accessories

Specifications

Function Return operation
Nominal voltage 24 VDC
Voltage range 20.4 ... 27.6 (24 ± 15%) VDC
Stroke 25 / 20 / 15 / 10 mm
Nominal Force 22 N (Pin 8 = 0) / 11 N (Pin 8 = 1) // 35 N (Pin 8 = 0) / 17.5 N (Pin 8 = 1)
Holding force [N] (selectable) 35 N (Pin 8 = 0) / 17.5 N (Pin 8 = 1)
Max. Power 75 W (Pin 8 = 0) / 24 W (Pin 8 = 1)
Max. Current consumption (short-term) 3.125 A (Pin 8 = 0) / 1.0 A (Pin 8 = 1)
Holding power 6.2 W (Pin 8 = 0) / 3.0 W (Pin 8 = 1)
Holding current 0.270 A (Pin 8 = 0) / 0.125 A (Pin 8 = 1)
Min. stroke time (without load) 40 / 35 / 30 / 25 ms
Maximum work cycles 250 / 300 1/min
Working cycles continuous operation 50 (Pin 8 = 0) / 250 (Pin 8 = 1) // 60 (Pin 8 = 0) / 300 (Pin 8 = 1)
Insulation class B (130°C) DIN VDE 0580
Test voltage
Overvoltage category EN 60664-1
III
Protection class IP65 (IEC 60529)
El. connection type M12 round plug A-coded, 8-pin, plug
Surface treatment black lacquered
Moving mass 0.145 / 0.155 / 0.145 / 0.155 kg
Total magnet weight 1.150 / 1.160 / 1.150 / 1.160 kg
Storage temperature -20 ... + 60 °C
Ambient temperature 0 ... + 40 °C
Relative air humidity 0 … 90 %
Anti-twist device No external torque permitted
Maintenance maintenance-free
CE labelling DIN VDE 0580 / IEC61000-6 (EMV) / 2011/65/EU (RoHS II + III)

Technical drawings

Please note
The following configurations are available:
Stroke 25 & 20mm with nominal force 22N
Stroke 15 & 10mm with nominal force 35N
Accessories can be ordered separately
(for details see data sheet accessories)

 

Accessories Overview
10_01_2_DYM-50_Opt_Flansch_Flange
10_01_2_DYM-50_Opt_Gabelkopf_Clevis
10_01_2_DYM-50_Opt_Schwenklager_Swivel-Bearing
Product downloads
DYM-050 Datenblatt
DYM-050 Accessories
DYM-050 EU Declaration of incorporation

Download CAD data

3D model DYNAMAG 25 Stroke
3D model DYNAMAG 20 Stroke
3D model DYNAMAG 15 Stroke
3D model DYNAMAG 10 Stroke
3D model DYNAMAG flange accessories
3D model DYNAMAG swivel bearing accessories
3D model DYNAMAG clevis accessories
DYM-50_25_20N_3000px

Notes

  1. Alle DYNAMAG sind hergestellt und geprüft nach DIN VDE 0580
  2. The forces are measured at operating temperature at 20°C ambient temperature, horizontal direction of movement with 90% rated voltage
  3. Force specifications are for reference only and may deviate by ±10% due to tolerances
  4. Special versions are available
  5. Subject to change without notice - Illustrations non-binding
  6. RoHS compliant, free from halogens and silicone
  7. Die Betriebsanleitung gibt Auskunft über den Einsatz des DYNAMAG sowie zu allgemeinen Montage- und Sicherheitshinweisen
  8. The documents required in accordance with the Machinery Directive 2006/42/EC and all environmental declarations are available on request
  9. Made in Switzerland
Download PDF with details

Got questions?

Leave us your question, we will answer it as soon as possible.

Facebook Instagram Linkedin
Contact

ISLIKER MAGNETE is an independent, internationally active family business specializing in the development, production and distribution of innovative solenoid technology products.

Legal pages

ISLIKER MAGNETE is an independent, internationally active family business specializing in the development, production and distribution of innovative solenoid technology products.

Contact
Legal pages

© 2022 ISLIKER MAGNETE AG - all rights reserved.

Webumsetzung mit ♥ von der Werbeagentur hingucker.ch

CNC-Rockstar
gesucht!

CNC-Rockstar
gesucht!

Jetzt Jobs entdecken